Pulse Output for the WM-PD:

The WM-PD Series water meters are all equipped to provide a pulse output of 20 pulses per gallon.

How Does Pulse Output Work?

Click Here to Learn more about how pulse output works

Why Would I Want Pulse Output?

Pulse output is used to allow the water meter to communicate with external electronic equipment.
- Simple Pulse Counter (many to choose from in the "Add Accessories" section)
- A transciever that communicates with a gateway for a wireless submetering system
- A Batch Controller
- A Programmable Logic Controller (PLC), Human Machine Interface (HMI), or other control system

These meters already have the magnet in them.
By selecting anything other than "None", you are simply buying a wire with the reed switch on it.
The switch will come preinstalled on the meter. You CAN buy the WM-PD-REED after the fact and install it yourself.

Reed Switches for WM-PD Meters

WM-PD

WM-PD-REED

What Pulse Value should I choose?

There is only one chioce for these meters - 20 pulses per gallon. The reed switch closes for 50% of the 0.05 gallon increment and is open for the other 50%.

Still Unsure?

If you have any doubts or questions about selecting the correct pulse output for your water meter, don't hesitate to reach out to our customer support team at 855-871-6091 for assistance.