The use of WiFi to remotely read your water use is finally here! With no monthly fees, our WiFi Remote Water Meter Reading System is the perfect solution for small properties to monitor water use. The new updates also allow this system to work with an Ethernet connection instead of WiFi. Whether you're monitoring 1 water meter or 32, this system is easy and effective. Simply plug the NoWire unit to a 120V outlet and plug the provided power supply adapter into the WebConnect modem and a 120V outlet. Then choose the WiFi access point and enter your password. When the WiFi connection is made, information should be populated within 8 hours. The NoWire uploads data 3 times a day to the cloud service.
Note: WiFi networks that require a web based login (national coffee house chains for example) are not supported. Only visible 2.4GHz open or password protected networks are supported
This is a complete system which includes the water meter(s) with pulse output, a battery operated transmitter(s) (gets connected to wire on face of the meter) and the NoWire receiver with WiFi connectivity. Note: With the direct wire option, there is no transmitter. The meter gets directly wired to the receiver, which saves you money. We recommend purchasing back flow preventers if there's any chance of back flow to avoid incorrect readings.
Does this system seem costly? Consider the cost of undetected leaks, massive pipe bursts, indifferent renters, etc. and you’ll understand its value.
Features & Benefits
- 4 Wired or up to 32 wireless meter pulse inputs
- Will function with most pulse meters (water, gas, electric, etc)
- Custom programmed meter designation easily entered on site (ex: Apt. 1, 102 Main St, etc)
- Read data in multiple measurement units (gallon, cubic feet, etc)
- No software required! Onboard buttons and passcode protected menus make it 100% customizable
- Backlit 2” X 16” LCD display
- NEMA4X Outdoor Rating for Receiver
- Wall transformer power supply included
1 Review Hide Reviews Show Reviews
I purchased an old building that had four tenants, all with variable water use requirements, but was serviced by a single water meter. Additionally, we had a water leak that ran for a few days before it was discovered doing extensive damage. I purchased this NoWire 1100 WiFi remote water meter system along with hard wired meters. Best concept ever! After an easy initial configuration, the unit was set up in the building and has been reporting data to my home. It allows me to now individually bill my tenants for their water usage along with being able to monitor for any other possible leaks. Flows customer support and well as NoWire’s technical support made the installation and set up easy. I highly recommend this set up as a low-cost alternative to installing water company meters.